Home
Products
Alarm Security

Remote Start

Keyless Entry

Upgrade Add-On

Immobilizer

Remote Transmitters

Accessories

Installation Hardware
Support
Catalogs

Manuals
About Us
Contact Us

Accessories

Wide range of accessories to compliment existing security systems or for custom installations and setups.
We offer many items including antennas, batteries, displays, doors and windows, LEDs and switches, sensors, and sirens and strobes.

Antennas & Receivers

MPANT - AM CB Radio Pager Strip Antenna With Motorola Style Male Plug And For Car Alarm Paging Security Systems

AM or CB radio antenna with Motorola style male plug (3M adhesive tape backing for mounting)
Windshield mount PCB strip design (Do not attach to metal, window defrosters, or existing antennas)
Also used for 4Watt 27MHz car alarm pager paging security systems (No need to use existing car antenna)

RSANT - Range Extender Antenna With RCA Style Male Plug For Remote Start Car Starter And Alarm Security Systems

Range extender antenna with RCA style male plug (Double sided tape required for mounting antenna)
Di-pole long range antenna for maximum optimized range (Mount as high as possible and away from metal)
Must be mounted in vertical position and whips following curve of glass (Antenna whips going up and down)
For many types of car alarm security and remote start convenience systems (Directly plug into units with RCA style female plug)
Plug can be cut for many universal applications (Strip 1/4" of alarm antenna wire and solder to extender center conductor wire)
Excess cable wire must be coiled into figure "8" shape for optimal performance (Do not cut any of the excess cable wire)

Batteries & Power

BATP23A - 12Volt Alarm Remote Alkaline Batteries 23A

Alkaline batteries
12volt operation
23A size
For garage door opener and car alarm remote control
Carded 5 pack

BATP27A - 12Volt Alarm Remote Alkaline Batteries 27A

Alkaline batteries
12volt operation
27A size
For garage door opener and car alarm remote control
Carded 5 pack

CR1620 - 3Volt Coin Cell Lithium Batteries 16mm x 2.0mm

Lithium batteries
3volt operation
16mm x 2.0mm size
Coin cell
Carded 5 pack

CR2016 - 3Volt Coin Cell Lithium Batteries 20mm x 1.6mm

Lithium batteries
3volt operation
20mm x 1.6mm size
Coin cell
Carded 5 pack

CR2025 - 3Volt Coin Cell Lithium Batteries 20mm x 2.5mm

Lithium batteries
3volt operation
20mm x 2.5mm size
Coin cell
Carded 5 pack

CR2032 - 3Volt Coin Cell Lithium Batteries 20mm x 3.2mm

Lithium batteries
3volt operation
20mm x 1.6mm size
Coin cell
Carded 5 pack

Displays & Holders

DISP - Wall Mount Retail Shop Car Alarm Display Board

Car alarm display board
Retail shop use
Wall mount style
Mounting bracket
AC wall plug adapter

Doors & Windows

CBK - Cabled Door Lock Adapter Bracket Kit For Cable Door Lock Driven Type Systems

Cabled door lock adapter bracket kit
For use on cable door lock driven type systems
Allows use of aftermarket door lock actuators
Each kit operates one door
Mounting bracket and hardware included

CDK - Cabled Door Lock Adapter Rod Kit For Cable Door Lock Driven Type Systems

Cabled door lock adapter rod kit
For use on cable door lock driven type systems
Allows use of aftermarket door lock actuators
Each kit operates one door
Connecting rod and hardware included

DA2 - 2-Wire Door Lock Actuator With Mounting Bracket Connecting Rod And Hardware Kit

High power door lock actuator (5.5 inch length)
Two wire hook up
Reverse polarity to push/pull
0.75 inch travel distance
Includes mounting bracket, connecting rod, and hardware kit

DA5 - 5-Wire Door Lock Actuator With Mounting Bracket Connecting Rod And Hardware Kit

High power door lock actuator (5.5 inch length)
Five wire hook up
Reverse polarity to push/pull
0.75 inch travel distance
Includes mounting bracket, connecting rod, and hardware kit

DAB - Door Lock Actuator Loom Wire Sleeve Rubber Boot Flexible Tube

Door lock actuator loom sleeve
Flexible rubber boot tube
5 inch length (2 built in grommets)
0.5 inch diameter (0.375 inch hole opening)
Used for hiding, protecting, and running wires through

DAH - Door Lock Actuator Mounting Bracket Connecting Rod And Hardware Kit

Door lock actuator hardware
High quality mounting bracket (9.25 inch length)
Bendable connecting rod (9.75 inch length)
Mounting kit and screws
Used with any aftermarket actuator

DAKIT2 - 2-Door Central Locking Power Door Lock And Unlock Actuator Kit

Central door locking actuator kit converts manual door locks to full power
Two heavy duty smooth operating actuators and module with wiring harness
Operate with door lock switch or by adding one to vehicle
Easy hook-up to any car alarm security or keyless entry system
Mounting brackets, connecting rods, and hardware included for installation

DAKIT4 - 4-Door Central Locking Power Door Lock And Unlock Actuator Kit

Central door locking actuator kit converts manual door locks to full power
Four heavy duty smooth operating actuators and module with wiring harness
Operate with door lock switch or by adding one to vehicle
Easy hook-up to any car alarm security or keyless entry system
Mounting brackets, connecting rods, and hardware included for installation

DKM - Door Lock Interface Relay Kit Module Activated By Negative Pulse Outputs

Door lock interface relay kit module for various types of vehicle door lock systems
Convert negative door lock outputs to positive outputs
Use for reverse polarity alternating door lock systems
Wire additional or replacement door lock actuators to vehicle
Activated by negative pulse outputs from car alarm security or keyless entry system

DM802 - Door Lock Interface Pulse Generator Module Activated By Negative Constant Output

Door lock interface pulse generator module for various types of vehicle door lock systems
Converts latched trigger input to momentary pulsed negative or positive outputs
Add door lock controls to car alarm systems without door lock outputs
Works on standard (0.5 seconds) and vacuum (3.5 seconds) door lock systems
Activated by negative constant output such as starter kill output or ground output when armed

DAW - Door Lock Actuator Loom Extension Wire Harness With Plugs

Door lock actuator loom harness
Connect to door lock actuator wire leads
Two female bullet connectors for easy plug in design
Two 10 foot long color coded wires for lead extension
Used for installing door lock actuators in passenger doors or rear hatch

DSP - Heavy Duty Shaved Door Handle Solenoid Kit With Push Button 50Lbs Pull

Shaved door handle kit (50 Lbs pull rating)
Heavy duty high torque solenoid
Progressive weight return spring
Push button for manual release from inside
Mounting bracket, hardware, and wiring included

KCQD - Quick Disconnect Release Detach Pull Apart Key Chain Ring

Quick disconnect release detach pull apart key chain
Used where quick separation is necessary
Includes steel split ring on each end
All chrome plated steel construction
Can also be used for ID-badge holder clip

RKL - Two Circuit On/Off Key Switch With Two Round Keys

On/off key switch
Two circuit
Four wires
Two round keys
Key removable when switch off

SDP - Stainless Steel Spring Loaded Door Popper For Shaved Door Handle Kits

Stainless steel door popper for shaved door handle kits
Spring loaded
Anti-scratch tip
100% welded seems
Heavy duty coil springs

TRM - Heavy Duty Electronic Trunk Release Solenoid Kit With Push Button 11Lbs Pull

Electronic trunk release kit (11 Lbs pull rating)
Heavy duty high torque solenoid
Progressive weight return spring
Push button for manual release from inside
Mounting bracket, hardware, and wiring included

VDS - Sliding Van Door Lock Pad Contact Switch

Sliding van door lock pad contact switch
Universal fit for sliding van doors with 90 degree contact
Can be used for door switch or to get power to door lock actuators mounted
Double pin switch with matching plate mounts between door and door post
Includes instructions, mounting templates, connectors, and screws

VDSF - Sliding Van Door Lock Pad Contact Switch With Rubber Boot

Sliding van door lock pad contact switch
Universal fit for sliding van doors with 90 degree contact
Can be used for door switch or to get power to door lock actuators mounted
Double pin switch with matching plate mounts between door and door post
Includes rubber boot, instructions, mounting templates, and screws

VIP - Door Lock Polarity Voltage Negative To Positive Power Inverter

Door lock voltage power inverter
Reverses polarity of door lock outputs
Converts output from negative to positive
For car alarm security and keyless entry systems
Pre-wired to plug directly into most aftermarket systems

WT2 - 2 Window Roll Up Control Power Interface Module

2 window roll up control power interface module
Works with positive or negative type windows
Triggered by negative armed output of alarm system
Accessory wire to interface with starter kill or other optional device
Safety controls to automatically stop rolling up once window closed or if anything impedes in its motion

WT4 - 4-Window Roll Up Or 2 Window Roll Up/Down Control Power Interface Module

4 window roll up or 2 window roll up/down control power interface module
Works with positive or negative type windows
Triggered by negative armed output or negative pulse
Automatic temperature ventilation and remote manual ventilation
Safety controls to automatically stop rolling up once window closed or if anything impedes in its motion

LEDs & Switches

BLR - 3Volt Dash Mount Steady Blue Car Alarm Security LED With Red Plug

Dash mount car alarm security LED with 2-wire configuration and red plug (Power and ground)
3V DC operation with less than 30mA draw
Steady blue color illumination (Clear LED lens)
0.3125" (5/16") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.875" (7/8") mounting hole and housing size thickness (0.125" (1/8") LED thickness)

BLW - 3Volt Dash Mount Steady Blue Car Alarm Security LED With Mini White Plug

Dash mount car alarm security LED with 2-wire configuration and mini white plug (Power and ground)
3V DC operation with less than 30mA draw
Steady blue color illumination (Clear LED lens)
0.25" (1/4") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.375" (3/8") mounting hole and housing size thickness (0.125" (1/8") LED thickness)

CALED - 3Volt Dash Mount Steady Red Car Alarm Security LED

Dash mount car alarm security LED with 2-wire configuration (Power and ground) (Metal pins on wires)
3V DC operation with less than 10mA draw
Steady red color illumination (Red LED lens)
0.25" (1/4") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.375" (3/8") mounting hole and housing size thickness (0.0625" (1/16") LED thickness)

CALEDRD - 3Volt Dash Mount Steady Green Or Red Car Alarm Security LED

Dash mount car alarm security LED with 2-wire configuration (Power and ground) (Metal pins on wires)
3V DC operation with less than 10mA draw (Reversible wiring)
Steady green or red color illumination (Clear LED lens)
0.25" (1/4") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.375" (3/8") mounting hole and housing size thickness (0.0625" (1/16") LED thickness)

LDVPB - 3Volt Steady Blue Car Alarm Security LED And Momentary Push Button Valet Switch With Plugs

Dash mount car alarm security LED and valet switch with 2-plug configuration (Red and blue plugs)
3V DC operation LED with less than 30mA draw and steady blue color illumination (Clear LED lens)
SPST normally open (N/O) momentary push button valet switch for 12V applications
0.3125" (5/16") mounting hole and housing size diameter (0.125" (1/8") LED diameter, 1" switch perimeter)
0.25" (1/4") mounting hole and housing size thickness (0.375" (3/8") LED/push button thickness)

LDVPR - 3Volt Steady Red Car Alarm Security LED And Momentary Push Button Valet Switch With Plugs

Dash mount car alarm security LED and valet switch with 2-plug configuration (Red and blue plugs)
3V DC operation LED with less than 10mA draw and steady red color illumination (Red LED lens)
SPST normally open (N/O) momentary push button valet switch for 12V applications
0.3125" (5/16") mounting hole and housing size diameter (0.125" (1/8") LED diameter, 1" switch perimeter)
0.25" (1/4") mounting hole and housing size thickness (0.375" (3/8") LED/push button thickness)

LDVT - 3Volt Steady Red Car Alarm Security LED And On/Off Toggle Valet Switch With Plugs

Dash mount car alarm security LED and valet switch with 2-plug configuration (Red and blue plugs)
3V DC operation LED with less than 10mA draw and steady red color illumination (Red LED lens)
SPST on/off toggle switch for 12V applications and 3A 250V AC / 6A 125V AC rated working current and voltage
1.5" (1 1/2") mounting and housing size width (0.1875" (3/16") LED diameter, 0.25" (1/4") switch mounting hole diameter)
1.375" (1 3/8") mounting and housing size length (0.125" (1/8") LED thickness, 0.1875" (3/16") switch mounting hole thickness)

LED - 3Volt Dash Mount Steady Red Car Alarm Security LED

Dash mount car alarm security LED with 2-wire configuration (Power and ground)
3V DC operation with less than 10mA draw
Steady red color illumination (Red LED lens)
0.25" (1/4") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.375" (3/8") mounting hole and housing size thickness (0.1875" (3/16") LED thickness)

LEDM - 3Volt Dash Mount Steady Red Car Alarm Security LED

Dash mount car alarm security LED with 2-wire configuration (Power and ground)
3V DC operation with less than 10mA draw
Steady red color illumination (Red LED lens)
0.3125" (5/16") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.625" (5/8") mounting hole and housing size thickness (0.1875" (3/16") LED thickness)

LEDP - 3Volt Dash Mount Steady Red Car Alarm Security LED With Red Plug

Dash mount car alarm security LED with red plug and 2-wire configuration (Power and ground)
3V DC operation with less than 10mA draw
Steady red color illumination (Red LED lens)
0.3125" (5/16") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.875" (7/8") mounting hole and housing size thickness (0.125" (1/8") LED thickness)

LEDR - 3Volt Dash Mount Steady Red Car Alarm Security LED With Red Plug

Dash mount car alarm security LED with red plug and 2-wire configuration (Power and ground)
3V DC operation with less than 10mA draw
Steady red color illumination (Red LED lens)
0.3125" (5/16") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.875" (7/8") mounting hole and housing size thickness (0.125" (1/8") LED thickness)

LEDW - 3Volt Dash Mount Steady Red Car Alarm Security LED With Mini White Plug

Dash mount car alarm security LED with mini white plug and 2-wire configuration (Power and ground)
3V DC operation with less than 10mA draw
Steady red color illumination (Red LED lens)
0.25" (1/4") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.375" (3/8") mounting hole and housing size thickness (0.125" (1/8") LED thickness)

MLEDA - 12Volt Dash Mount Self-Flashing Amber Car Alarm Security LED

Dash mount car alarm security LED with 2-wire configuration (Power and ground)
3V - 12V DC operation with less than 10mA draw
Self-flashing amber color illumination (Amber LED lens)
0.25" (1/4") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.375" (3/8") mounting hole and housing size thickness (0.125" (1/8") LED thickness)

MLEDB - 12Volt Dash Mount Self-Flashing Blue Car Alarm Security LED

Dash mount car alarm security LED with 2-wire configuration (Power and ground)
3V - 12V DC operation with less than 30mA draw
Self-flashing blue color illumination (Clear LED lens)
0.25" (1/4") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.375" (3/8") mounting hole and housing size thickness (0.125" (1/8") LED thickness)

MLEDG - 12Volt Dash Mount Self-Flashing Green Car Alarm Security LED

Dash mount car alarm security LED with 2-wire configuration (Power and ground)
3V - 12V DC operation with less than 10mA draw
Self-flashing green color illumination (Green LED lens)
0.25" (1/4") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.375" (3/8") mounting hole and housing size thickness (0.125" (1/8") LED thickness)

MLEDR - 12Volt Dash Mount Self-Flashing Red Car Alarm Security LED

Dash mount car alarm security LED with 2-wire configuration (Power and ground)
3V - 12V DC operation with less than 10mA draw
Self-flashing red color illumination (Red LED lens)
0.25" (1/4") mounting hole and housing size diameter (0.1875" (3/16") LED diameter)
0.375" (3/8") mounting hole and housing size thickness (0.125" (1/8") LED thickness)

PBM - SPST Normally Open (N/O) Momentary Push Button Car Alarm Security Valet Switch

SPST normally open (N/O) momentary push button car alarm security valet switch
For 12V applications and 1A 250V AC / 3A 125V AC rated working current and voltage
0.25" (1/4") mounting hole diameter (0.25" (1/4") button diameter)
0.3125" (5/16") mounting hole thickness (0.3125" (5/16") button thickness)
0.125" (1/8") mounting panel thickness (Maximum)

PBMP - SPST Normally Open (N/O) Momentary Push Button Car Alarm Security Valet Switch With Plug

SPST normally open (N/O) momentary push button car alarm security valet switch with plug
For 12V applications and 1A 250V AC / 3A 125V AC rated working current and voltage
0.25" (1/4") mounting hole diameter (0.25" (1/4") button diameter)
0.3125" (5/16") mounting hole thickness (0.3125" (5/16") button thickness)
0.125" (1/8") mounting panel thickness (Maximum)

PBMPS - SPST Normally Open (N/O) Momentary Push Button Car Alarm Security Valet Switch With Plug

SPST normally open (N/O) momentary push button car alarm security valet switch with plug
For 12V applications and 0.5A 250V AC / 1A 125V AC rated working current and voltage
0.5625" (9/16") mounting diameter (0.1875" (3/16") button diameter)
0.4375" (7/16") mounting thickness (0.0625" (1/16") button thickness)
Flush design with sticker mount (No drilling of holes necessary)

TS - SPST On/Off Toggle Car Alarm Security Valet Switch

SPST on/off toggle car alarm security valet switch
For 12V applications and 3A 250V AC / 6A 125V AC rated current and voltage
0.25" (1/4") mounting hole diameter (0.1875" (3/16") switch diameter)
0.375" (3/8") mounting hole thickness (0.5" (1/2") switch thickness)
0.1875" (3/16") mounting panel thickness (Maximum)

TSP - SPST On/Off Toggle Car Alarm Security Valet Switch With Plug

SPST on/off toggle car alarm security valet switch with plug
For 12V applications and 3A 250V AC / 6A 125V AC rated current and voltage
0.25" (1/4") mounting hole diameter (0.1875" (3/16") switch diameter)
0.375" (3/8") mounting hole thickness (0.5" (1/2") switch thickness)
0.1875" (3/16") mounting panel thickness (Maximum)

Sensors & Detectors

CSP - Electromechanical Car Alarm Security Shock Sensor

Electromechanical car alarm security shock sensor
12V DC operation with less than 15mA draw
Modulated for precise and reliable performance
Tuning screw for adjusting trigger sensitivity
LED for testing unit to show working functionality
Removable metal mounting bracket included

EPZ1 - Piezoelectric Car Alarm Security Shock Sensor

Piezoelectric car alarm security shock sensor
12V DC operation with less than 15mA draw
Modulated for precise and reliable performance
Tuning screw for adjusting trigger sensitivity
LED for testing unit to show working functionality

EPZ2B - Dual Stage Piezoelectric Car Alarm Security Shock Sensor

Dual stage piezoelectric car alarm security shock sensor
12V DC operation with less than 15mA draw
Modulated for precise and reliable performance
First stage for light impact (Warn-away) and second stage for heavy impact (Full trigger)
Tuning screw for adjusting trigger sensitivity and separate LED for each stage for testing unit and sensitivity

EPZ2G - Dual Stage Piezoelectric Car Alarm Security Shock Sensor

Dual stage piezoelectric car alarm security shock sensor
12V DC operation with less than 15mA draw
Modulated for precise and reliable performance
First stage for light impact (Warn-away) and second stage for heavy impact (Full trigger)
Tuning screw for adjusting trigger sensitivity and separate LED for each stage for testing unit and sensitivity

ES1 - Piezoelectric Car Alarm Security Shock Sensor

Piezoelectric car alarm security shock sensor
12V DC operation with less than 15mA draw
Modulated for precise and reliable performance
Tuning screw for adjusting trigger sensitivity
LED for testing unit to show working functionality

ES2 - Dual Stage Dual Adjust Piezoelectric Car Alarm Security Shock Sensor

Dual stage dual adjust piezoelectric car alarm security shock sensor
12V DC operation with less than 15mA draw
Modulated for precise and reliable performance
First stage for light impact (Warn-away) and second stage for heavy impact (Full trigger)
Separate tuning screws for adjusting trigger sensitivities and separate LED for each stage for testing unit and sensitivity

GS2 - Dual Stage Audio Car Alarm Security Glass Break Sensor

Dual stage audio car alarm security glass break sensor (Microphone wire length: 36 inches)
12V DC operation with less than 15mA draw (Modulated for precise and reliable performance)
First stage for light impact (Warn-away) and second stage for heavy impact (Full trigger)
Detects audio vibrations through glass and even quiet breaks (Sensor tuned to frequency of breaking glass sound)
Precision engineered microphone analyzes frequency, intensity, and timing of intrusion sounds to prevent false alarms

KPS - Windshield Mount Paging Car Alarm Security Knock Sensor

Windshield mount paging car alarm security knock sensor
12V DC operation with less than 15mA draw
Triggers to notify driver by paging remote
Detects tapping on windshield or other glass surface
Adjustable sensitivity and mounted with double-sided tape

MCS - Mechanical Ball Bearing Switch Car Alarm Security Tilt Sensor

Mechanical ball bearing switch car alarm security tilt sensor
Triggers alarm in case of tilting attempts
Detects angle based on internal ball movement
Fully adjustable mounting bracket
Two wire ground trigger installation

MDP - Mechanical Tow Vertical Vibration Car Alarm Security Motion Sensor

Mechanical tow vertical vibration car alarm security motion sensor
Triggers alarm in case of towing attempts
Detects vertical vibration if car being jacked up or raised
Easy setup and adjustable sensitivity
Two wire ground trigger installation

MGT - Magnetic Reed Switch Normally Closed (N.C.) Or Normally Open (N.O.) Car Alarm Security Contact Sensor

Magnetic reed switch car alarm security contact sensor
Normally closed (N.C.) or normally open (N.O.) operation
30 Volts AC/DC switching voltage (Max) and 0.2 Amps switching current (Max)
0.5 Inch maximum operating gap (Dimensions: 2.5"L x 0.5"W x 0.5"H)
Mount with double sided tape (Included) or screws (Not included)

MRC - Flange Mount Bullet Ball Bearing Switch Car Alarm Security Tilt Sensor

Flange mount bullet ball bearing switch car alarm security tilt sensor
Triggers alarm in case of tilting attempts
Detects angle based on internal ball movement
Fully adjustable mounting bracket
Opens and closes as it is tilted in opposite directions

RDL1 - Microwave Radar Proximity Car Alarm Security Motion Sensor

Microwave radar proximity car alarm security motion sensor
12V DC operation with less than 15mA draw
Adjustable radar-based sensor that detects mass
Detects motion inside vehicle (Not affected by wind, noise, or temperature)
Sensor establishes self contained perimeter and triggers when field broken

RDL2 - Dual Zone Dual Adjust Microwave Radar Proximity Car Alarm Security Motion Sensor

Dual zone dual adjust microwave radar proximity car alarm security motion sensor
12V DC operation with less than 15mA draw
Adjustable radar-based sensor that detects mass (Interior and exterior zones independently adjustable)
Detects motion around exterior of vehicle and motion inside vehicle (Not affected by wind, noise, or temperature)
Sensor establishes self contained perimeter and triggers when field broken